* Docker CI builds: half the size, less than half the build time
* Add an "Official Build" Designator
* Fix .git constantly invalidating build cache, use distro ffmpeg
* Fix official build detection, add some compiler image docs
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Make copies of buffers
Avoid reusing one of the incoming arrays as a append extension, and
make a copy of the data. It's cleaner in the long run and possibly
easier for the GC to maintain.
* Avoid appendAssign problems in tag code
Reuse the existing slice when appending.
* Fix appendAssign in encoder_scene_preview_chunk
Appending and creating a new slice is somewhat unintuitive since the
underlying slice might be extended to satisfy the new capacity. This
sometimes leads to faulty logic.
Rewrite the code so it reuses `args` for all appending, and builds one
array clearly in the code. It follows the general style of the function
where `args` is being built in small incremental batches and avoids
the introduction of new names.
* Enable the appendAssign check
This makes us pass all gocritic warnings.
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes#1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Add a space after // comments
For consistency, the commentFormatting lint checker suggests a space
after each // comment block. This commit handles all the spots in
the code where that is needed.
* Rewrite documentation on functions
Use the Go idiom of commenting:
* First sentence declares the purpose.
* First word is the name being declared
The reason this style is preferred is such that grep is able to find
names the user might be interested in. Consider e.g.,
go doc -all pkg/ffmpeg | grep -i transcode
in which case a match will tell you the name of the function you are
interested in.
* Remove old code comment-blocks
There are some commented out old code blocks in the code base. These are
either 3 years old, or 2 years old. By now, I don't think their use is
going to come back any time soon, and Git will track old pieces of
deleted code anyway.
Opt for deletion.
* Reorder imports
Split stdlib imports from non-stdlib imports in files we are touching.
* Use a range over an iteration variable
Probably more go-idiomatic, and the code needed comment-fixing anyway.
* Use time.After rather than rolling our own
The idiom here is common enough that the stdlib contains a function for
it. Use the stdlib function over our own variant.
* Enable the commentFormatting linter
* Don't capitalize local variables
ValidCodecs -> validCodecs
* Capitalize deprecation markers
A deprecated marker should be capitalized.
* Use re.MustCompile for static regexes
If the regex fails to compile, it's a programmer error, and should be
treated as such. The regex is entirely static.
* Simplify else-if constructions
Rewrite
else { if cond {}}
to
else if cond {}
* Use a switch statement to analyze formats
Break an if-else chain. While here, simplify code flow.
Also introduce a proper static error for unsupported image formats,
paving the way for being able to check against the error.
* Rewrite ifElse chains into switch statements
The "Effective Go" https://golang.org/doc/effective_go#switch document
mentions it is more idiomatic to write if-else chains as switches when
it is possible.
Find all the plain rewrite occurrences in the code base and rewrite.
In some cases, the if-else chains are replaced by a switch scrutinizer.
That is, the code sequence
if x == 1 {
..
} else if x == 2 {
..
} else if x == 3 {
...
}
can be rewritten into
switch x {
case 1:
..
case 2:
..
case 3:
..
}
which is clearer for the compiler: it can decide if the switch is
better served by a jump-table then a branch-chain.
* Rewrite switches, introduce static errors
Introduce two new static errors:
* `ErrNotImplmented`
* `ErrNotSupported`
And use these rather than forming new generative errors whenever the
code is called. Code can now test on the errors (since they are static
and the pointers to them wont change).
Also rewrite ifElse chains into switches in this part of the code base.
* Introduce a StashBoxError in configuration
Since all stashbox errors are the same, treat them as such in the code
base. While here, rewrite an ifElse chain.
In the future, it might be beneifical to refactor configuration errors
into one error which can handle missing fields, which context the error
occurs in and so on. But for now, try to get an overview of the error
categories by hoisting them into static errors.
* Get rid of an else-block in transaction handling
If we succesfully `recover()`, we then always `panic()`. This means the
rest of the code is not reachable, so we can avoid having an else-block
here.
It also solves an ifElse-chain style check in the code base.
* Use strings.ReplaceAll
Rewrite
strings.Replace(s, o, n, -1)
into
strings.ReplaceAll(s, o, n)
To make it consistent and clear that we are doing an all-replace in the
string rather than replacing parts of it. It's more of a nitpick since
there are no implementation differences: the stdlib implementation is
just to supply -1.
* Rewrite via gocritic's assignOp
Statements of the form
x = x + e
is rewritten into
x += e
where applicable.
* Formatting
* Review comments handled
Stash-box is a proper noun.
Rewrite a switch into an if-chain which returns on the first error
encountered.
* Use context.TODO() over context.Background()
Patch in the same vein as everything else: use the TODO() marker so we
can search for it later and link it into the context tree/tentacle once
it reaches down to this level in the code base.
* Tell the linter to ignore a section in manager_tasks.go
The section is less readable, so mark it with a nolint for now. Because
the rewrite enables a ifElseChain, also mark that as nolint for now.
* Use strings.ReplaceAll over strings.Replace
* Apply an ifElse rewrite
else { if .. { .. } } rewrite into else if { .. }
* Use switch-statements over ifElseChains
Rewrite chains of if-else into switch statements. Where applicable,
add an early nil-guard to simplify case analysis. Also, in
ScanTask's Start(..), invert the logic to outdent the whole block, and
help the reader: if it's not a scene, the function flow is now far more
local to the top of the function, and it's clear that the rest of the
function has to do with scene management.
* Enable gocritic on the code base.
Disable appendAssign for now since we aren't passing that check yet.
* Document the nolint additions
* Document StashBoxBatchPerformerTagInput
* Use the request context
The code uses context.Background() in a flow where there is a
http.Request. Use the requests context instead.
* Use a true context in the plugin example
Let AddTag/RemoveTag take a context and use that context throughout
the example.
* Avoid the use of context.Background
Prefer context.TODO over context.Background deep in the call chain.
This marks the site as something which we need to context-handle
later, and also makes it clear to the reader that the context is
sort-of temporary in the code base.
While here, be consistent in handling the `act` variable in each
branch of the if .. { .. } .. check.
* Prefer context.TODO over context.Background
For the different scraping operations here, there is a context
higher up the call chain, which we ought to use. Mark the call-sites
as TODO for now, so we can come back later on a sweep of which parts
can be context-lifted.
* Thread context upwards
Initialization requires context for transactions. Thread the context
upward the call chain.
At the intialization call, add a context.TODO since we can't break this
yet. The singleton assumption prevents us from pulling it up into main for
now.
* make tasks context-aware
Change the task interface to understand contexts.
Pass the context down in some of the branches where it is needed.
* Make QueryStashBoxScene context-aware
This call naturally sits inside the request-context. Use it.
* Introduce a context in the JS plugin code
This allows us to use a context for HTTP calls inside the system.
Mark the context with a TODO at top level for now.
* Nitpick error formatting
Use %v rather than %s for error interfaces.
Do not begin an error strong with a capital letter.
* Avoid the use of http.Get in FFMPEG download chain
Since http.Get has no context, it isn't possible to break out or have
policy induced. The call will block until the GET completes. Rewrite
to use a http Request and provide a context.
Thread the context through the call chain for now. provide
context.TODO() at the top level of the initialization chain.
* Make getRemoteCDPWSAddress aware of contexts
Eliminate a call to http.Get and replace it with a context-aware
variant.
Push the context upwards in the call chain, but plug it before the
scraper interface so we don't have to rewrite said interface yet.
Plugged with context.TODO()
* Scraper: make the getImage function context-aware
Use a context, and pass it upwards. Plug it with context.TODO()
up the chain before the rewrite gets too much out of hand for now.
Minor tweaks along the way, remove a call to context.Background()
deep in the call chain.
* Make NOTIFY request context-aware
The call sits inside a Request-handler. So it's natural to use the
requests context as the context for the outgoing HTTP request.
* Use a context in the url scraper code
We are sitting in code which has a context, so utilize it for the
request as well.
* Use a context when checking versions
When we check the version of stash on Github, use a context. Thread
the context up to the initialization routine of the HTTP/GraphQL
server and plug it with a context.TODO() for now.
This paves the way for providing a context to the HTTP server code in a
future patch.
* Make utils func ReadImage context-aware
In almost all of the cases, there is a context in the call chain which
is a natural use. This is true for all the GraphQL mutations.
The exception is in task_stash_box_tag, so plug that task with
context.TODO() for now.
* Make stash-box get context-aware
Thread a context through the call chain until we hit the Client API.
Plug it with context.TODO() there for now.
* Enable the noctx linter
The code is now free of any uncontexted HTTP request. This means we
pass the noctx linter, and we can enable it in the code base.
* Add collation to directory listings. Closes#1806
Introduce a new `locale` arg to the `Query.directory` field. Set "en"
as the default for the field for backward compatibility. Use the given
locale, sending it through a language matcher, and use `x/text` as the
collation engine for the matched language.
Augment the file `ListDirs` call to optionally take a Collator. If the
Collator is given, sort file listings according to the collators rules.
While here, document the GraphQL schema a bit more.
Add matchers by looking at the current front-end locales, and make sure
each of these occur in the matcher list.
* Language matcher touchups
* Avoid having `en-US` twice.
* Introduce `en-AU`.
* Pass IgnoreCase and Numeric collation
Allow the collator to be configured with options. Pass the options
IgnoreCase and Numeric to the collator.
* Replace error assertions with Go 1.13 style
Use `errors.As(..)` over type assertions. This enables better use of
wrapped errors in the future, and lets us pass some errorlint checks
in the process.
The rewrite is entirely mechanical, and uses a standard idiom for
doing so.
* Use Go 1.13's errors.Is(..)
Rather than directly checking for error equality, use errors.Is(..).
This protects against error wrapping issues in the future.
Even though something like sql.ErrNoRows doesn't need the wrapping, do
so anyway, for the sake of consistency throughout the code base.
The change almost lets us pass the `errorlint` Go checker except for
a missing case in `js.go` which is to be handled separately; it isn't
mechanical, like these changes are.
* Remove goconst
goconst isn't a useful linter in many cases, because it's false positive
rate is high. It's 100% for the current code base.
* Avoid direct comparison of errors in recover()
Assert that we are catching an error from recover(). If we are,
check that the error caught matches errStop.
* Enable the "errorlint" checker
Configure the checker to avoid checking for errorf wraps. These are
often false positives since the suggestion is to blanket wrap errors
with %w, and that exposes the underlying API which you might not want
to do.
The other warnings are good however, and with the current patch stack,
the code base passes all these checks as well.
* Configure rowserrcheck
The project uses sqlx. Configure rowserrcheck to include said package.
* Mechanically rewrite a large set of errors
Mechanically search for errors that look like
fmt.Errorf("...%s", err.Error())
and rewrite those into
fmt.Errorf("...%v", err)
The `fmt` package is error-aware and knows how to call err.Error()
itself.
The rationale is that this is more idiomatic Go; it paves the
way for using error wrapping later with %w in some sites.
This patch only addresses the entirely mechanical rewriting caught by
a project-side search/replace. There are more individual sites not
addressed by this patch.
Reduce allocations. Don't create intermediary arrays which we then
consume right after. Manually fuse the arrays and decode straight into
the sum instead.
Furthermore, don't invoke a Reader, but carve out the locations via a
loop, directly.
These two changes taken together speeds up oshash computations by a
factor of 10 according to the benchmark tests. The main reason for
this change is a much lowered memory allocation rate which in turn
improves GC pressure.
While here, add a benchmark for oshash computations and use it for
testing the performance.
* Refactor scraper structures
* Move matching code into new package
* Add autotag scraper
* Always check first letter of auto-tag names
* Account for nulls
Co-authored-by: Kermie <kermie@isinthe.house>
* Add security against publicly exposed services
* Add trusted proxies setting, validate proxy chain against internet access
* Validate chain on local proxies too
* Move authentication handler to separate file
* Add startup check and log if tripwire is active
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Enable safe linters
Enable the linters dogsled, rowserrcheck, and sqlclosecheck.
These report no errors currently in the code base.
Enable misspell.
Misspell finds two spelling mistakes in comments, which are fixed by the
patch as well.
Add and sort linters which are relatively
safe to add over time. Comment them out for now.
* Close the response body
If we can get a HTTP response, it has a body which ought to be closed.
By doing so, we avoid potentially leaking connections.
* Enable the exportloopref linter
There are two places in the code with these warnings. Fix them while
enabling the linter.
* Remove redundant types in tests
If a slice already determines the type, the inner type declaration is
redundant. Remove the inner declarations.
* Mark autotag test cases as parallel
Autotag test cases is by far the outlier when it comes to test time.
While go test runs test cases in parallel,
it doesn't do so inside a given package, unless one marks the test cases
as parallel.
This change provides a significant speedup on a 8-core machine for test
runs.
* Rewrite lightbox code
* Don't render offscreen images
* Scroll up to zoom in
* Support touch gestures
* Add reset zoom button
* Align top of image on original/fit horizontal
* Add scrollmode setting
* Add scale up option
* Add option to maintain zoom when transisitioning
* Fix image slideshow wrap around
* Wrap around on previous on first page/image
* Fix single page issues
* Fix two-pointer zoom mode incorrectly activated
* Add API support for filtering tags by parent / children
* Add parent & child tags filters for tags to UI
* Add API support for filtering tags by parent / child count
* Add parent & child count filters for tags to UI
* Update db generator
* Add missing build tag
* Add unit tests
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
