* Add Cookies directly to the request
Rather than maintaining a cookie jar on a one-shot HTTP client, maintain
the jar ourselves: make a new jar, then use it to select the right
cookies.
The cookies are set on the request rather than on the client. This will
retain the current behavior as we are always throwing the client away
after each use.
This patch enables the lifting of the http client as well over time.
* Introduce a cached scraper HTTP client
The scraper cache is augmented with an *http.Client. These are safe for
concurrent use, so the pointer can safely be passed around. Push this
into scraper configurations where applicable, next to the txnManagers.
When we issue a loadUrl request, do so on the cached *http.Client,
which will reuse existing idle connections in the client if any are
present.
* Set MaxIdleConnsPerHost. Closes#1850
We allow for up to 8 idle connections to a single host. This should
make concurrent operation toward the same host reuse connections, even
for sizeable concurrency.
The number isn't bumped excessively high. We should probably limit
concurrency toward a single site anyway, since we'll be able to overrun
a site with queries quite easily if we have many concurrent goroutines
issuing requests at the same time.
* Reinstate driverOptions / useCDP check
Use DeMorgan's laws to invert the logic and exit early. Fixes tests
breaking.
* Documentation fixup.
* Use the scraper http.Client when fetching images
Fold image fetchers onto the cached scraper http.Client as well. This
makes the scraper have a single http.Client cache for all its
operations.
Thread the client upwards to the relevant attachment points: either the
cache, or a stash_box instance, which is extended to include a pointer
to the client.
Style roughly follows that of txnManagers.
* Use the same http Client as the GraphQL client use
Rather than using http.DefaultClient, use the same client as the
GraphQL client use in the stash_box subsystem. This localizes the
client used in the subsystem into the constructing New.. call.
* Hoist HTTP client construction
Create a function for initializaing the HTTP Client we use. While here
hoist magic numbers into constants. Introduce a proper static redirect
error and use it in the client code as well.
* Reinstate printCookies
This is a debugging function, and it might still come in handy in the
future at some point.
* Nitpick comment.
* Minor tidy
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Don't capitalize local variables
ValidCodecs -> validCodecs
* Capitalize deprecation markers
A deprecated marker should be capitalized.
* Use re.MustCompile for static regexes
If the regex fails to compile, it's a programmer error, and should be
treated as such. The regex is entirely static.
* Simplify else-if constructions
Rewrite
else { if cond {}}
to
else if cond {}
* Use a switch statement to analyze formats
Break an if-else chain. While here, simplify code flow.
Also introduce a proper static error for unsupported image formats,
paving the way for being able to check against the error.
* Rewrite ifElse chains into switch statements
The "Effective Go" https://golang.org/doc/effective_go#switch document
mentions it is more idiomatic to write if-else chains as switches when
it is possible.
Find all the plain rewrite occurrences in the code base and rewrite.
In some cases, the if-else chains are replaced by a switch scrutinizer.
That is, the code sequence
if x == 1 {
..
} else if x == 2 {
..
} else if x == 3 {
...
}
can be rewritten into
switch x {
case 1:
..
case 2:
..
case 3:
..
}
which is clearer for the compiler: it can decide if the switch is
better served by a jump-table then a branch-chain.
* Rewrite switches, introduce static errors
Introduce two new static errors:
* `ErrNotImplmented`
* `ErrNotSupported`
And use these rather than forming new generative errors whenever the
code is called. Code can now test on the errors (since they are static
and the pointers to them wont change).
Also rewrite ifElse chains into switches in this part of the code base.
* Introduce a StashBoxError in configuration
Since all stashbox errors are the same, treat them as such in the code
base. While here, rewrite an ifElse chain.
In the future, it might be beneifical to refactor configuration errors
into one error which can handle missing fields, which context the error
occurs in and so on. But for now, try to get an overview of the error
categories by hoisting them into static errors.
* Get rid of an else-block in transaction handling
If we succesfully `recover()`, we then always `panic()`. This means the
rest of the code is not reachable, so we can avoid having an else-block
here.
It also solves an ifElse-chain style check in the code base.
* Use strings.ReplaceAll
Rewrite
strings.Replace(s, o, n, -1)
into
strings.ReplaceAll(s, o, n)
To make it consistent and clear that we are doing an all-replace in the
string rather than replacing parts of it. It's more of a nitpick since
there are no implementation differences: the stdlib implementation is
just to supply -1.
* Rewrite via gocritic's assignOp
Statements of the form
x = x + e
is rewritten into
x += e
where applicable.
* Formatting
* Review comments handled
Stash-box is a proper noun.
Rewrite a switch into an if-chain which returns on the first error
encountered.
* Use context.TODO() over context.Background()
Patch in the same vein as everything else: use the TODO() marker so we
can search for it later and link it into the context tree/tentacle once
it reaches down to this level in the code base.
* Tell the linter to ignore a section in manager_tasks.go
The section is less readable, so mark it with a nolint for now. Because
the rewrite enables a ifElseChain, also mark that as nolint for now.
* Use strings.ReplaceAll over strings.Replace
* Apply an ifElse rewrite
else { if .. { .. } } rewrite into else if { .. }
* Use switch-statements over ifElseChains
Rewrite chains of if-else into switch statements. Where applicable,
add an early nil-guard to simplify case analysis. Also, in
ScanTask's Start(..), invert the logic to outdent the whole block, and
help the reader: if it's not a scene, the function flow is now far more
local to the top of the function, and it's clear that the rest of the
function has to do with scene management.
* Enable gocritic on the code base.
Disable appendAssign for now since we aren't passing that check yet.
* Document the nolint additions
* Document StashBoxBatchPerformerTagInput
* Use the request context
The code uses context.Background() in a flow where there is a
http.Request. Use the requests context instead.
* Use a true context in the plugin example
Let AddTag/RemoveTag take a context and use that context throughout
the example.
* Avoid the use of context.Background
Prefer context.TODO over context.Background deep in the call chain.
This marks the site as something which we need to context-handle
later, and also makes it clear to the reader that the context is
sort-of temporary in the code base.
While here, be consistent in handling the `act` variable in each
branch of the if .. { .. } .. check.
* Prefer context.TODO over context.Background
For the different scraping operations here, there is a context
higher up the call chain, which we ought to use. Mark the call-sites
as TODO for now, so we can come back later on a sweep of which parts
can be context-lifted.
* Thread context upwards
Initialization requires context for transactions. Thread the context
upward the call chain.
At the intialization call, add a context.TODO since we can't break this
yet. The singleton assumption prevents us from pulling it up into main for
now.
* make tasks context-aware
Change the task interface to understand contexts.
Pass the context down in some of the branches where it is needed.
* Make QueryStashBoxScene context-aware
This call naturally sits inside the request-context. Use it.
* Introduce a context in the JS plugin code
This allows us to use a context for HTTP calls inside the system.
Mark the context with a TODO at top level for now.
* Nitpick error formatting
Use %v rather than %s for error interfaces.
Do not begin an error strong with a capital letter.
* Avoid the use of http.Get in FFMPEG download chain
Since http.Get has no context, it isn't possible to break out or have
policy induced. The call will block until the GET completes. Rewrite
to use a http Request and provide a context.
Thread the context through the call chain for now. provide
context.TODO() at the top level of the initialization chain.
* Make getRemoteCDPWSAddress aware of contexts
Eliminate a call to http.Get and replace it with a context-aware
variant.
Push the context upwards in the call chain, but plug it before the
scraper interface so we don't have to rewrite said interface yet.
Plugged with context.TODO()
* Scraper: make the getImage function context-aware
Use a context, and pass it upwards. Plug it with context.TODO()
up the chain before the rewrite gets too much out of hand for now.
Minor tweaks along the way, remove a call to context.Background()
deep in the call chain.
* Make NOTIFY request context-aware
The call sits inside a Request-handler. So it's natural to use the
requests context as the context for the outgoing HTTP request.
* Use a context in the url scraper code
We are sitting in code which has a context, so utilize it for the
request as well.
* Use a context when checking versions
When we check the version of stash on Github, use a context. Thread
the context up to the initialization routine of the HTTP/GraphQL
server and plug it with a context.TODO() for now.
This paves the way for providing a context to the HTTP server code in a
future patch.
* Make utils func ReadImage context-aware
In almost all of the cases, there is a context in the call chain which
is a natural use. This is true for all the GraphQL mutations.
The exception is in task_stash_box_tag, so plug that task with
context.TODO() for now.
* Make stash-box get context-aware
Thread a context through the call chain until we hit the Client API.
Plug it with context.TODO() there for now.
* Enable the noctx linter
The code is now free of any uncontexted HTTP request. This means we
pass the noctx linter, and we can enable it in the code base.
* Replace error assertions with Go 1.13 style
Use `errors.As(..)` over type assertions. This enables better use of
wrapped errors in the future, and lets us pass some errorlint checks
in the process.
The rewrite is entirely mechanical, and uses a standard idiom for
doing so.
* Use Go 1.13's errors.Is(..)
Rather than directly checking for error equality, use errors.Is(..).
This protects against error wrapping issues in the future.
Even though something like sql.ErrNoRows doesn't need the wrapping, do
so anyway, for the sake of consistency throughout the code base.
The change almost lets us pass the `errorlint` Go checker except for
a missing case in `js.go` which is to be handled separately; it isn't
mechanical, like these changes are.
* Remove goconst
goconst isn't a useful linter in many cases, because it's false positive
rate is high. It's 100% for the current code base.
* Avoid direct comparison of errors in recover()
Assert that we are catching an error from recover(). If we are,
check that the error caught matches errStop.
* Enable the "errorlint" checker
Configure the checker to avoid checking for errorf wraps. These are
often false positives since the suggestion is to blanket wrap errors
with %w, and that exposes the underlying API which you might not want
to do.
The other warnings are good however, and with the current patch stack,
the code base passes all these checks as well.
* Configure rowserrcheck
The project uses sqlx. Configure rowserrcheck to include said package.
* Mechanically rewrite a large set of errors
Mechanically search for errors that look like
fmt.Errorf("...%s", err.Error())
and rewrite those into
fmt.Errorf("...%v", err)
The `fmt` package is error-aware and knows how to call err.Error()
itself.
The rationale is that this is more idiomatic Go; it paves the
way for using error wrapping later with %w in some sites.
This patch only addresses the entirely mechanical rewriting caught by
a project-side search/replace. There are more individual sites not
addressed by this patch.
* Refactor scraper structures
* Move matching code into new package
* Add autotag scraper
* Always check first letter of auto-tag names
* Account for nulls
Co-authored-by: Kermie <kermie@isinthe.house>
* Enable safe linters
Enable the linters dogsled, rowserrcheck, and sqlclosecheck.
These report no errors currently in the code base.
Enable misspell.
Misspell finds two spelling mistakes in comments, which are fixed by the
patch as well.
Add and sort linters which are relatively
safe to add over time. Comment them out for now.
* Close the response body
If we can get a HTTP response, it has a body which ought to be closed.
By doing so, we avoid potentially leaking connections.
* Enable the exportloopref linter
There are two places in the code with these warnings. Fix them while
enabling the linter.
* Remove redundant types in tests
If a slice already determines the type, the inner type declaration is
redundant. Remove the inner declarations.
* Mark autotag test cases as parallel
Autotag test cases is by far the outlier when it comes to test time.
While go test runs test cases in parallel,
it doesn't do so inside a given package, unless one marks the test cases
as parallel.
This change provides a significant speedup on a 8-core machine for test
runs.
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* Log 3 unchecked errors
Rather than ignore errors, log them at
the WARNING log level.
The server has been functioning without these, so assume they are not at
the ERROR level.
* Log errors in concurrency test
If we can't initialize the configuration, treat the test as a failure.
* Undo the errcheck on configurations for now.
* Handle unchecked errors in pkg/manager
* Resolve unchecked errors
* Handle DLNA/DMS unchecked errors
* Handle error checking in concurrency test
Generalize config initialization, so we can initialize a configuration
without writing it to disk.
Use this in the test case, since otherwise the test fails to write.
* Handle the remaining unchecked errors
* Heed gosimple in update test
* Use one-line if-initializer statements
While here, fix a wrong variable capture error.
* testing.T doesn't support %w
use %v instead which is supported.
* Remove unused query builder functions
The Int/String criterion handler functions are now generalized.
Thus, there's no need to keep these functions around anymore.
* Mark filterBuilder.addRecursiveWith nolint
The function is useful in the future and no other refactors are looking
nice.
Keep the function around, but tell the linter to ignore it.
* Remove utils.Btoi
There are no users of this utility function
* Return error on scan failure
If we fail to scan the row when looking for the
unique checksum index, then report the error upwards.
* Fix comments on exported functions
* Fix typos
* Fix startup error
* Fix logs from scraper and plugins not being shown in UI
Using `logger.` in the logger package to write logs is "incorrect". This
as the package contains a variable named `logger` which contains the
logrus instance. So instead of the log line being handled by the custom
log implementation / wrapper which makes sure the lines are shown in the
UI as well, it's written to logrus directly meaning the wrapper is
skipped.
This "issue" is obviously triggered because in any other place
`logger.X` can be used and it will used the custom logger package /
wrapper which works fine.
* Add plugin / scraper name to logging output
Indicate which plugin / scraper wrote a log message by including its
name to the `[Scrape]` prefix.
* Add missing addLogItem call
* Add migration to create studio aliases table
* Refactor studioQueryBuilder.Query to use filterBuilder
* Expand GraphQL API with aliases support for studio
* Add aliases support for studios to the UI
* List aliases in details panel
* Allow editing aliases in edit panel
* Add 'aliases' filter when searching
* Find studios by alias in filter / select
* Add auto-tagging based on studio aliases
* Support studio aliases for filename parsing
* Support importing and exporting of studio aliases
* Search for studio alias as well during scraping
The strings.Replace function counts the number of replacements. If 0,
the original string is returned. Hence, there is no need to check if a
replacement will happen before doing the work.
* Remove stuff which isn't being used
Some fields, functions and structs aren't in use by the project. Remove
them for janitorial reasons.
* Remove more unused code
All of these functions are currently not in use. Clean up the code by
removal, since the version control has the code if need be.
* Remove unused functions
There's a large set of unused functions and variables in the code base.
Remove these, so it clearer what code to support going forward.
Dead code has been eliminated.
Where applicable, comment const-sections in tests, so reserved
identifiers are still known.
* Fix use-def of tsURL
The first def of tsURL doesn't matter because there's no use before
we hit the 2nd def.
* Remove dead code assignment
Setting logFile = "" is effectively dead code, because there's no use
of it later.
* Comment out found
The variable 'found' is dead in the function (because no post-process
action is following it). Comment it for now.
* Comment dead code in tests
These might provide hints as to what isn't covered at the moment.
* Dead code removal
In the case of constants where iota is involved, move the iota so it
matches the current key values.
This avoids problems with persistently stored key IDs.
* Fix error string capitalization
Error strings often follow another string. Hence, they should not be
capitalized, unless referencing a name.
* Uncapitalize more error strings
While here, use %v on the error directly, which makes it easier to wrap
the error later with %w if need be.
* Uncapitalize more error strings
While here, rename Url to URL as a nitpick.
* Unify scraped types
* Make name fields optional
* Unify single scrape queries
* Change UI to use new interfaces
* Add multi scrape interfaces
* Use images instead of image
* Add config option for scraper tag exclusion patterns
Add a config option for exclusing tags / tag patterns from the scraper
results.
* Handle tag exclusion patterns during scraping
* Add Tag Update/UpdateFull
* Tag alias implementation
* Refactor tag page
* Add aliases in UI
* Include tag aliases in q filter
* Include aliases in tag select
* Add aliases to auto-tagger
* Use aliases in scraper
* Add tag aliases for filename parser
* cleanup: remove dead code
removing some code that does nothing
* cleanup: fixing usage of deprecated gqlgen/graphql api in api/changeset_translator
* cleanup: changing to recommended comparison methods
Changing byte and case-insensitive string comparison to the recommended methods.
* cleanup: making staticcheck happy
* Apply all post processors to performer
Scraping a performer by fragment doesn't correctly work with tags.
When tags are returned to the scraper then all are recognized as new.
This is due to the post process method not being applied while it should
be, as is done when scraping a performer by URL.
* Make config instance-based
* Remove config dependency in paths
* Refactor config init
* Allow startup without database
* Get system status at UI initialise
* Add setup wizard
* Cache and Metadata optional. Database mandatory
* Handle metadata not set during full import/export
* Add links
* Remove config check middleware
* Stash not mandatory
* Panic on missing mandatory config fields
* Redirect setup to main page if setup not required
* Add migration UI
* Remove unused stuff
* Move UI initialisation into App
* Don't create metadata paths on RefreshConfig
* Add folder selector for generated in setup
* Env variable to set and create config file.
Make docker images use a fixed config file.
* Set config file during setup
* Add scraping support for performer tags
* Add performer count to tag cards
* Refactor sqlite test setup
* Add performer tag filtering in gallery and image
* Add bulk update performer
* Add Performers tab to tag page
* Add count filters and sort bys for tags
* Move scene count to icon in performer card #1148
* find correct python executable
For script scrapers using python, both python and python3 are valid depending on the OS and running environment. To save users from having any issues, this change will find the correct executable for them.
Co-authored-by: bnkai <bnkai@users.noreply.github.com>
* Expose url for URLReplace in JSON scrapeByURL and scrapeByFragment
* Apply queryURLReplace to xpath scrapers
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Fix potential image errors
* Fix issue preventing favoriting of tagged performers
* Add error handling in case of network issues
* Show individual search errors
* Unset scene results if query fails
* Don't abort scene submission if scene id isn't found
* Add gql client generation files
* Update dependencies
* Add stash-box client generation to the makefile
* Move scraped scene object matchers to models
* Add stash-box to scrape with dropdown
* Add scrape scene from fingerprint in UI
* api/urlbuilders/movie: Auto format.
* graphql+pkg+ui: Implement scraping movies by URL.
This patch implements the missing required boilerplate for scraping
movies by URL, using performers and scenes as a reference.
Although this patch contains a big chunck of ground work for enabling
scraping movies by fragment, the feature would require additional
changes to be completely implemented and was not tested.
* graphql+pkg+ui: Scrape movie studio.
Extends and corrects the movie model for the ability to store and
dereference studio IDs with received studio string from the scraper.
This was done with Scenes as a reference. For simplicity the duplication
of having `ScrapedMovieStudio` and `ScrapedSceneStudio` was kept, which
should probably be refactored to be the same type in the model in the
future.
* ui/movies: Add movie scrape dialog.
Adds possibility to update existing movie entries with the URL scraper.
For this the MovieScrapeDialog.tsx was implemented with Performers and
Scenes as a reference. In addition DurationUtils needs to be called one
time for converting seconds from the model to the string that is
displayed in the component. This seemed the least intrusive to me as it
kept a ScrapeResult<string> type compatible with ScrapedInputGroupRow.
* Refactor xpath scraper code
* Make post-process a list
* Add map post-process action
* Add fixed xpath values
* Refactor scrapers into cache
* Refactor into mapped config
* Trim test html
* Add reload scraper option to performer details
* Add scraper reload to scene edit page
* Show scene scraper menu when no queryable scrapers
* Add 0.3 changelog
* Change scrape matching (studio, movies, tag, performers) to case insensitive
* * fix collate order
* * make filename parser findbyname calls case insensitive
* * add unit testing for Tags GetFindbyName/s
* Add lint/format checks to build
* Make travis get full repo to get tags
* Run packr2 once in cross-compile
* Fix quotes in package.json
* Fix linting issues
* Formatting
* Fix vet issue
* Fix go lint issues
* Show start of each platform compilation
* Add validate target
* Set gitattributes for go fmt and mod vendor
* Fix tag name
* Add fmt-ui target
* Add sub-scraper functionality
* Add scraping of performer image
* Add scene cover image scraping
* Port UI changes to v2.5
* Fix v2.5 dialog suggest color
* Don't convert eol of UI to support pretty
* Add stash scraper type
* Add graphql client to vendor
* Embed stash credentials in URL
* Fill URL from scraped scene
* Nil IDs returned from remote stash
* Nil check
