* Use the request context
The code uses context.Background() in a flow where there is a
http.Request. Use the requests context instead.
* Use a true context in the plugin example
Let AddTag/RemoveTag take a context and use that context throughout
the example.
* Avoid the use of context.Background
Prefer context.TODO over context.Background deep in the call chain.
This marks the site as something which we need to context-handle
later, and also makes it clear to the reader that the context is
sort-of temporary in the code base.
While here, be consistent in handling the `act` variable in each
branch of the if .. { .. } .. check.
* Prefer context.TODO over context.Background
For the different scraping operations here, there is a context
higher up the call chain, which we ought to use. Mark the call-sites
as TODO for now, so we can come back later on a sweep of which parts
can be context-lifted.
* Thread context upwards
Initialization requires context for transactions. Thread the context
upward the call chain.
At the intialization call, add a context.TODO since we can't break this
yet. The singleton assumption prevents us from pulling it up into main for
now.
* make tasks context-aware
Change the task interface to understand contexts.
Pass the context down in some of the branches where it is needed.
* Make QueryStashBoxScene context-aware
This call naturally sits inside the request-context. Use it.
* Introduce a context in the JS plugin code
This allows us to use a context for HTTP calls inside the system.
Mark the context with a TODO at top level for now.
* Nitpick error formatting
Use %v rather than %s for error interfaces.
Do not begin an error strong with a capital letter.
* Avoid the use of http.Get in FFMPEG download chain
Since http.Get has no context, it isn't possible to break out or have
policy induced. The call will block until the GET completes. Rewrite
to use a http Request and provide a context.
Thread the context through the call chain for now. provide
context.TODO() at the top level of the initialization chain.
* Make getRemoteCDPWSAddress aware of contexts
Eliminate a call to http.Get and replace it with a context-aware
variant.
Push the context upwards in the call chain, but plug it before the
scraper interface so we don't have to rewrite said interface yet.
Plugged with context.TODO()
* Scraper: make the getImage function context-aware
Use a context, and pass it upwards. Plug it with context.TODO()
up the chain before the rewrite gets too much out of hand for now.
Minor tweaks along the way, remove a call to context.Background()
deep in the call chain.
* Make NOTIFY request context-aware
The call sits inside a Request-handler. So it's natural to use the
requests context as the context for the outgoing HTTP request.
* Use a context in the url scraper code
We are sitting in code which has a context, so utilize it for the
request as well.
* Use a context when checking versions
When we check the version of stash on Github, use a context. Thread
the context up to the initialization routine of the HTTP/GraphQL
server and plug it with a context.TODO() for now.
This paves the way for providing a context to the HTTP server code in a
future patch.
* Make utils func ReadImage context-aware
In almost all of the cases, there is a context in the call chain which
is a natural use. This is true for all the GraphQL mutations.
The exception is in task_stash_box_tag, so plug that task with
context.TODO() for now.
* Make stash-box get context-aware
Thread a context through the call chain until we hit the Client API.
Plug it with context.TODO() there for now.
* Enable the noctx linter
The code is now free of any uncontexted HTTP request. This means we
pass the noctx linter, and we can enable it in the code base.
* Add collation to directory listings. Closes#1806
Introduce a new `locale` arg to the `Query.directory` field. Set "en"
as the default for the field for backward compatibility. Use the given
locale, sending it through a language matcher, and use `x/text` as the
collation engine for the matched language.
Augment the file `ListDirs` call to optionally take a Collator. If the
Collator is given, sort file listings according to the collators rules.
While here, document the GraphQL schema a bit more.
Add matchers by looking at the current front-end locales, and make sure
each of these occur in the matcher list.
* Language matcher touchups
* Avoid having `en-US` twice.
* Introduce `en-AU`.
* Pass IgnoreCase and Numeric collation
Allow the collator to be configured with options. Pass the options
IgnoreCase and Numeric to the collator.
* Replace error assertions with Go 1.13 style
Use `errors.As(..)` over type assertions. This enables better use of
wrapped errors in the future, and lets us pass some errorlint checks
in the process.
The rewrite is entirely mechanical, and uses a standard idiom for
doing so.
* Use Go 1.13's errors.Is(..)
Rather than directly checking for error equality, use errors.Is(..).
This protects against error wrapping issues in the future.
Even though something like sql.ErrNoRows doesn't need the wrapping, do
so anyway, for the sake of consistency throughout the code base.
The change almost lets us pass the `errorlint` Go checker except for
a missing case in `js.go` which is to be handled separately; it isn't
mechanical, like these changes are.
* Remove goconst
goconst isn't a useful linter in many cases, because it's false positive
rate is high. It's 100% for the current code base.
* Avoid direct comparison of errors in recover()
Assert that we are catching an error from recover(). If we are,
check that the error caught matches errStop.
* Enable the "errorlint" checker
Configure the checker to avoid checking for errorf wraps. These are
often false positives since the suggestion is to blanket wrap errors
with %w, and that exposes the underlying API which you might not want
to do.
The other warnings are good however, and with the current patch stack,
the code base passes all these checks as well.
* Configure rowserrcheck
The project uses sqlx. Configure rowserrcheck to include said package.
* Mechanically rewrite a large set of errors
Mechanically search for errors that look like
fmt.Errorf("...%s", err.Error())
and rewrite those into
fmt.Errorf("...%v", err)
The `fmt` package is error-aware and knows how to call err.Error()
itself.
The rationale is that this is more idiomatic Go; it paves the
way for using error wrapping later with %w in some sites.
This patch only addresses the entirely mechanical rewriting caught by
a project-side search/replace. There are more individual sites not
addressed by this patch.
* Add security against publicly exposed services
* Add trusted proxies setting, validate proxy chain against internet access
* Validate chain on local proxies too
* Move authentication handler to separate file
* Add startup check and log if tripwire is active
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Fix all revive warnings in the code base
All of these are of the form
```
var Identifier Type = Expr
```
where the `Type` is known from the output of `Expr` and can be omitted
as a result.
* Handle unchecked errors
* Remove new-from-rev
Since the project passes all linter checks now, including older
revisions, we can remove new-from-rev. While here, reorder the linter
config file, and move the enabled linters up and settings down.
* Fix failing test cases
Studio & Performer export tests use local time rather than UTC. This
fixes the test cases so integration test
passes.
* Add movies and movie_count properties to Performer type
Extend the GraphQL API to allow getting the movies and movie count by
performer.
* Add movies count to performer card
* Add movies and movie_count properties to Studio type
Extend the GraphQL API to allow getting the movies and movie count by
studio.
* Add movies count to studio card
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* Support getting scenes on movies in the API
* Make movie card visually consistent with scene etc
* Add date
* Add synopsis
* Show scene count with hover listing the scenes
* Move scene index to button
* Move scene number to own section
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Log 3 unchecked errors
Rather than ignore errors, log them at
the WARNING log level.
The server has been functioning without these, so assume they are not at
the ERROR level.
* Log errors in concurrency test
If we can't initialize the configuration, treat the test as a failure.
* Undo the errcheck on configurations for now.
* Handle unchecked errors in pkg/manager
* Resolve unchecked errors
* Handle DLNA/DMS unchecked errors
* Handle error checking in concurrency test
Generalize config initialization, so we can initialize a configuration
without writing it to disk.
Use this in the test case, since otherwise the test fails to write.
* Handle the remaining unchecked errors
* Heed gosimple in update test
* Use one-line if-initializer statements
While here, fix a wrong variable capture error.
* testing.T doesn't support %w
use %v instead which is supported.
* Remove unused query builder functions
The Int/String criterion handler functions are now generalized.
Thus, there's no need to keep these functions around anymore.
* Mark filterBuilder.addRecursiveWith nolint
The function is useful in the future and no other refactors are looking
nice.
Keep the function around, but tell the linter to ignore it.
* Remove utils.Btoi
There are no users of this utility function
* Return error on scan failure
If we fail to scan the row when looking for the
unique checksum index, then report the error upwards.
* Fix comments on exported functions
* Fix typos
* Fix startup error
* Improve image scanning performance and thumbnail generation
* Add vips-tools to build image
* Add option to write generated thumbnails to disk
* Fallback to image if thumbnail generation fails
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Support subpaths when serving stash through a reverse proxy
* Add README documentation
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Avoid redundant logging in migrations
Return the error and let the caller handle the logging of the error if
needed.
While here, defer m.Close() to the function boundary.
* Treat errors as values
Use %v rather than %s and pass the errors directly.
* Generate a wrapped error on stat-failure
* Log 3 unchecked errors
Rather than ignore errors, log them at
the WARNING log level.
The server has been functioning without these, so assume they are not at
the ERROR level.
* Propagate errors upward
Failure in path generation was ignored. Propagate the errors upward the
call stack, so it can be handled at the level of orchestration.
* Warn on errors
Log errors rather than quenching them.
Errors are logged at the Warn-level for now.
* Check error when creating test databases
Use the builtin log package and stop the program fatally on error.
* Add warnings to uncheck task errors
Focus on the task system in a single commit, logging unchecked
errors as warnings.
* Warn-on-error in API routes
Look through the API routes, and make sure errors are being logged if
they occur. Prefer the Warn-log-level because none of these has proven
to be fatal in the system up until now.
* Propagate error when adding Util API
* Propagate error on adding util API
* Return unhandled error
* JS log API: propagate and log errors
* JS Plugins: log GQL addition failures.
* Warn on failure to write to stdin
* Warn on failure to stop task
* Wrap viper.BindEnv
The current viper code only errors if no name is provided, so it should
never fail. Rewrite the code flow to factor through a panic-function.
This removes error warnings from this part of the code.
* Log errors in concurrency test
If we can't initialize the configuration, treat the test as a failure.
* Warn on errors in configuration code
* Plug an unchecked error in gallery zip walking
* Warn on screenshot serving failure
* Warn on encoder screenshot failure
* Warn on errors in path-handling code
* Undo the errcheck on configurations for now.
* Use one-line initializers where applicable
rather than using
err := f()
if err!= nil { ..
prefer the shorter
if err := f(); err != nil { ..
If f() isn't too long of a name, or wraps a function with a body.
* Generate screenshot images for markers
In some scenarios it might not be possible to use the preview video or
image of markers, i.e. when only static images are supported like in
Kodi. So generate a static screenshot as well.
* Make generating animated and static image optional for markers
* Use screenshot for markers when preview type is set to static image
* Add migration to create studio aliases table
* Refactor studioQueryBuilder.Query to use filterBuilder
* Expand GraphQL API with aliases support for studio
* Add aliases support for studios to the UI
* List aliases in details panel
* Allow editing aliases in edit panel
* Add 'aliases' filter when searching
* Find studios by alias in filter / select
* Add auto-tagging based on studio aliases
* Support studio aliases for filename parsing
* Support importing and exporting of studio aliases
* Search for studio alias as well during scraping
* Add migration script for tag relations table
* Expand hierarchical filter features
Expand the features of the hierarchical multi input filter with support
for using a relations table, which only has parent_id and child_id
columns, and support adding an additional intermediate table to join on,
for example for scenes and tags which are linked by the scenes_tags
table as well.
* Add hierarchical filtering for tags
* Add hierarchical tags support to scene markers
Refactor filtering of scene markers to filterBuilder and in the process
add support for hierarchical tags as well.
* List parent and child tags on tag details page
* Support setting parent and child tags
Add support for setting parent and child tags during tag creation and
tag updates.
* Validate no loops are created in tags hierarchy
* Update tag merging to support tag hierarcy
* Add unit tests for tags.EnsureUniqueHierarchy
* Fix applying recursive to with clause
The SQL `RECURSIVE` of a `WITH` clause only needs to be applied once,
imediately after the `WITH`. So this fixes the query building to do just
that, automatically applying the `RECURSIVE` keyword when any added with
clause is added as recursive.
* Rename hierarchical root id column
* Rewrite hierarchical filtering for performance
Completely rewrite the hierarchical filtering to optimize for
performance. Doing the recursive query in combination with a complex
query seems to break SQLite optimizing some things which means that the
recursive part might be 2,5 second slower than adding a static
`VALUES()` list. This is mostly noticable in case of the tag hierarchy
where setting an exclusion with any depth (or depth: all) being applied
has this performance impact of 2,5 second. "Include" also suffered this
issue, but some rewritten query by joining in the *_tags table in one
pass and applying a `WHERE x IS NOT NULL` filter did seem to optimize
that case. But that optimization isn't applied to the `IS NULL` filter
of "exclude". Running a simple query beforehand to get all (recursive)
items and then applying them to the query doesn't have this performance
penalty.
* Remove UI references to child studios and tags
* Add parents to tag export
* Support importing of parent relationship for tags
* Assign stable ids to parent / child badges
* Silence Apollo warning on parents/children fields on tags
Silence warning triggered by Apollo GraphQL by explicitly instructing it
to use the incoming parents/children values. By default it already does
this, but it triggers a warning as it might be unintended that it uses
the incoming values (instead of for example merging both arrays).
Setting merge to false still applies the same behaviour (use only
incoming values) but silences the warning as it's explicitly configured
to work like this.
* Rework detecting unique tag hierarchy
Completely rework the unique tag hierarchy to detect invalid hierarchies
for which a tag is "added in the middle". So when there are tags A <- B
and A <- C, you could previously edit tag B and add tag C as a sub tag
without it being noticed as parent A being applied twice (to tag C).
While afterwards saving tag C would fail as tag A was applied as parent
twice. The updated code correctly detects this scenario as well.
Furthermore the error messaging has been reworked a bit and the message
now mentions both the direct parent / sub tag as well as the tag which
would results in the error. So in aboves example it would now show the
message that tag C can't be applied because tag A already is a parent.
* Update relations on cached tags when needed
Update the relations on cached tags when a tag is created / updated /
deleted so these always reflect the correct state. Otherwise (re)opening
a tag might still show the old relations untill the page is fully
reloaded or the list is navigated. But this obviously is strange when
you for example have tag A, create or update tag B to have a relation to
tag A, and from tags B page click through to tag A and it doesn't show
that it is linked to tag B.
* Remove stuff which isn't being used
Some fields, functions and structs aren't in use by the project. Remove
them for janitorial reasons.
* Remove more unused code
All of these functions are currently not in use. Clean up the code by
removal, since the version control has the code if need be.
* Remove unused functions
There's a large set of unused functions and variables in the code base.
Remove these, so it clearer what code to support going forward.
Dead code has been eliminated.
Where applicable, comment const-sections in tests, so reserved
identifiers are still known.
* Fix use-def of tsURL
The first def of tsURL doesn't matter because there's no use before
we hit the 2nd def.
* Remove dead code assignment
Setting logFile = "" is effectively dead code, because there's no use
of it later.
* Comment out found
The variable 'found' is dead in the function (because no post-process
action is following it). Comment it for now.
* Comment dead code in tests
These might provide hints as to what isn't covered at the moment.
* Dead code removal
In the case of constants where iota is involved, move the iota so it
matches the current key values.
This avoids problems with persistently stored key IDs.
* Bump Go to 1.17, refactor build/x86_64 Dockerfile to make better use of multi-stage
* Bump to 1.17 from 1.16
* Bump packr version, provide needed legacy env var
* Add apple silicon support, fix macos build chain
* Update unused travis ci
* Fix error string capitalization
Error strings often follow another string. Hence, they should not be
capitalized, unless referencing a name.
* Uncapitalize more error strings
While here, use %v on the error directly, which makes it easier to wrap
the error later with %w if need be.
* Uncapitalize more error strings
While here, rename Url to URL as a nitpick.
* Unify scraped types
* Make name fields optional
* Unify single scrape queries
* Change UI to use new interfaces
* Add multi scrape interfaces
* Use images instead of image
* Add script offset / delay to Handy support.
Further work on #1376.
Offsets are added to the current video position, so a positive value leads to earlier motion. (The most common setting.)
This is needed because most script times have a consistent delay when compared to the video. (Delay from the API calls to the server should be handled by the server offset calculation.)
* Rename scriptOffset to funscriptOffset
* Correct localisation keys
Co-authored-by: WithoutPants <53250216+WithoutPants@users.noreply.github.com>
* Add config option for scraper tag exclusion patterns
Add a config option for exclusing tags / tag patterns from the scraper
results.
* Handle tag exclusion patterns during scraping
* Change scrapers overview into collapsible per type
* Move scraping configuration to (renamed) scrapers tab
Rename the Scrapers tab to Scraping and move the scraping configuration
to this tab.
* Add API to merge tags
Add new API endpoint, `tagsMerge(source, destination)` to merge multiple
tags into a single one. The "sources" must be provided as a list of ids
and the destination as a single id. All usages of the source tags
(scenes, markers (primary and additional), images, galleries and
performers) will be updated to the destination tag, all aliases of the
source tags will be updated to the destination, and the name of the
source will be added as alias to the destination as well.
* Add merge tag UI
* Add unit tests
* Update test mocks
* Update internationalisation
* Add changelog entry
Co-authored-by: gitgiggety <gitgiggety@outlook.com>
* Add Tag Update/UpdateFull
* Tag alias implementation
* Refactor tag page
* Add aliases in UI
* Include tag aliases in q filter
* Include aliases in tag select
* Add aliases to auto-tagger
* Use aliases in scraper
* Add tag aliases for filename parser
* cleanup: remove dead code
removing some code that does nothing
* cleanup: fixing usage of deprecated gqlgen/graphql api in api/changeset_translator
* cleanup: changing to recommended comparison methods
Changing byte and case-insensitive string comparison to the recommended methods.
* cleanup: making staticcheck happy
* Add funscript route to scenes
Adds a /scene/:id/funscript route which serves a funscript file, if present.
Current convention is that these are files stored with the same path, but with the extension ".funscript".
* Look for funscript during scan
This is stored in the Scene record and used to drive UI changes for funscript support.
Currently, that's limited to a funscript link in the Scene's file info.
* Add filtering and sorting for interactive
* Add Handy connection key to interface config
* Add Handy client and placeholder component.
Uses defucilis/thehandy, but not thehandy-react as I had difficulty integrating the context with the existing components.
Instead, the expensive calculation for the server time offset is put in localStorage for reuse.
A debounce was added when scrubbing the video, as otherwise it spammed the Handy API with updates to the current offset.
